Wood-burning fireplace
Embers are the concern here, so the cap's mesh doubles as a spark arrestor, sized within the code's 3/8 to 1/2 inch range and built so a sweep can open it.
Chimney Pro Cleaners · Powdersville area, Anderson County
Chimney Pro Cleaners discusses chimney cap installation for homes in the Powdersville area of Anderson County SC, from screened caps on wood-burning flues to the correct caps for gas fireplaces and appliance vents. Call 864-727-7460 with your address and tell us what the fireplace burns.
Call 864-727-7460Free Phone Consultation with a Certified Technician
Wood, gas logs, a sealed gas insert with glass front, or a fireplace you never use: each one changes which cap the top of the chimney needs.
Also tell us whether the chimney is brick or a sided chase, and send a ground-level photo if you can.
864-727-7460 ↗Unincorporated area
The Census Bureau lists Powdersville as a Census Designated Place in Anderson County, not an incorporated town (Census Bureau 2020 place codes, South Carolina). There is no Powdersville building office. Residential permitting and inspections for unincorporated Anderson County are handled by Anderson County Building & Codes, whose residential documents list state modifications to the 2021 I-Codes and a 2021 IRC inspection checklist (Anderson County Building & Codes).
Anderson County Planning's Highway 153 Corridor Plan describes SC 153 linking the Greenville area, I-85, Easley and Anderson through the historically rural Powdersville area, now under growth pressure (Anderson County Planning, Highway 153 Corridor Plan). The plan says nothing about chimneys, so we do not assume one house type; we identify each chimney before naming a cap. Check with Building & Codes for property-specific approval before crown or chase framing repair.
Some mailing addresses in the area carry a nearby city's name. For any building question, the parcel's county record is what counts.
Fuel types
Embers are the concern here, so the cap's mesh doubles as a spark arrestor, sized within the code's 3/8 to 1/2 inch range and built so a sweep can open it.
The logs vent up the existing fireplace flue, which normally takes a standard screened chimney cap sized to the tile.
The appliance vent ends in a listed termination cap. Nothing improvised, including mesh, goes over it.
An unused flue still collects rain and invites animals. A cap protects it until you decide whether to use or retire the fireplace.
Behind the two gas cards sits one code line: under the 2021 IRC fuel gas chapter, a gas vent ends in a listed cap or listed roof assembly (2021 International Residential Code, Chapter 24 gas vent termination (G2427.6)). A part made for a wood flue is not a stand-in.
Safety
A gas appliance's vent cap is designed to let exhaust out at the rate the appliance produces it. Covering it with fine screen, a decorative hood or a homemade guard can restrict that flow, and exhaust that does not leave the vent can spill back into the house as carbon monoxide.
If the cap on a gas vent is missing, crushed or blocked, turn the appliance off and have it checked before using it again. Make sure working CO alarms are installed near sleeping areas.
We replace damaged gas vent caps with the listed part for that vent and leave fireplace-style screens for wood and masonry flues.
Chase tops
Factory-built fireplaces in sided chases have two parts on top: the chase cover over the framing and the termination cap on the flue pipe. A rusted cover lets water into the framing; a damaged termination lets rain and animals into the pipe.
We measure the chase for a custom cover and identify the fireplace system from its model plate for the termination. If the sheathing under the old cover is soft, you hear about it before any new cover goes on.

Masonry
On a brick chimney, the cap fastens to the clay flue tile or anchors to the crown. Both need a sound base. A cracked crown or loose tile is fixed first, because a new cap on a failing crown leaks around its fasteners and loosens over time.
If the chimney has more than one flue, each working flue needs enough open area, and any gas vent among them keeps its own listed cap.

Sequence
When a gas appliance is involved, a little planning keeps the visit simple. Note the brand and model of the fireplace, insert or furnace from its rating plate, and whether a gas technician has serviced it recently. If the appliance has not been running right, such as a pilot that keeps going out or soot on the glass, have it checked by a qualified gas technician; those symptoms are not cap problems.
For a wood or gas-log fireplace sharing a chimney with a furnace vent, we plan two different caps on the same chimney top. You will hear which part goes on which opening before work starts.
Price
Fuel type, the cap or listed part needed, flue count, metal, and crown or chase repair are the main factors. We measure first and then price. The main chimney cap installation guide page has more on cap styles, and the South Carolina chimney services hub lists related chimney repairs we discuss in South Carolina.
Caps, covers and access
Discuss your chimney top before scheduling.
Call 864-727-7460 ↗
Powdersville has no town government; Census records it as a Census Designated Place inside Anderson County. That makes Anderson County Building & Codes the office for building questions here.
A sealed gas insert usually vents through a liner or pipe that ends in its own listed termination cap. It does not take a regular mesh chimney cap over that vent. The model plate tells us which termination it uses.
Gas logs in a masonry fireplace use the chimney flue, and that flue still needs protection from rain and animals. A standard screened chimney cap sized to the tile is typical. We confirm when we see the setup.
Turn the appliance off and call 864-727-7460. Do not run the appliance with a missing or crushed vent cap, and do not cover the vent with anything improvised.
Not unless the shroud is listed for use with that appliance's termination. Unlisted shrouds and covers can restrict exhaust. We will tell you what the manufacturer allows once we know the model.
Yes. An open, unused flue still lets in rain and animals. A cap protects the chimney until you decide whether to use the fireplace again or have it professionally closed.
Part of our South Carolina service network
Nearby, see chimney caps in Piedmont, Easley chimney cap installation, chimney cap installation in Berea SC, Greenville chimney cap installation and Mauldin chimney cap installation.
For a property elsewhere in South Carolina, start with our South Carolina chimney repair hub, or read the company's general chimney cap installation guide. Those company guides may show a Georgia number; use 864-727-7460 for your Powdersville inquiry. This page does not represent a staffed Powdersville office.
References: Census Bureau 2020 place codes, South Carolina · Anderson County Building & Codes · 2021 International Residential Code, Chapter 10 (R1003.9.1 caps, R1003.9.2 spark arrestors) · 2021 International Residential Code, Chapter 24 gas vent termination (G2427.6) · Anderson County Planning, Highway 153 Corridor Plan
Have your property address ready