Hood height
Enough clearance above the flue outlet that smoke leaves freely.
Chimney caps for wood stoves, clay-lined flues and summer storms
Chimney Pro Cleaners measures and installs chimney caps for homes in the Town of Moncks Corner, including clay-lined masonry flues and wood stove chimneys. Call 864-727-7460 or send the form with your address, what you burn, and a photo of the chimney top, and we will match the cap to the flue and the appliance.
Call 864-727-7460Free Phone Consultation with a Certified Technician
The Town of Moncks Corner runs its own permits and inspections through its Community Development department, with a permit technician for questions. That is the office to ask about any roof work rules inside town limits.
For the cap itself, we need to know whether the chimney serves an open fireplace, a wood stove insert or a freestanding stove, and how many openings sit on top.
864-727-7460 ↗Town rules
Check with the town for your address and scope. It gives homeowners a direct line to a permit technician for exactly this kind of question.
The town's Town of Moncks Corner Building Permits and Inspections page lists its Community Development staff and invites questions to the permit technician at 843-719-7914. Its FAQ list also includes wind load and seismic design criteria, which tells you the town thinks about how rooftop items hold up. A chimney cap is small, but it sits in the wind.
We suggest calling before work, describing the job as a cap or chase cover replacement, and asking whether anything is required. Ask us whether written product details can be arranged for that office.
Summer storms
An open flue is a vertical pipe pointing at the sky. In a heavy downpour, a surprising amount of water lands straight in it.
The State Climatology Office explains in its SC State Climatology Office, Climate of South Carolina summary that South Carolina has a secondary rainfall maximum running parallel to the coast about 10 to 20 miles inland, driven by summer sea-breeze thunderstorms. We do not have town-level rainfall data and will not claim any. The general point holds: a short, hard summer rain can push a lot of water into a flue that has no hood over it, wetting the smoke chamber and the damper and rusting stove connectors.
Wood stoves
A correctly sized cap should not choke a stove's draft. Trouble comes from caps with too little height above the flue, mesh that is too fine for wood smoke, or a screen that has clogged with creosote.
Enough clearance above the flue outlet that smoke leaves freely.
Coarse enough to resist clogging, fine enough to stop animals and large embers.
Where a stainless liner runs up the chimney, the cap should be made to fit that liner.
Creosote builds up on mesh as well as in the flue. A blackened screen means it is time for a sweep.

Tile flues
Clay tiles come in square, rectangular and round shapes and several sizes. A single-flue cap is sized to the outside of the tile and either clamps to it or sits on legs anchored to the crown. If the tile stands only an inch or two above the crown, a clamp may not have enough to grip, and an outside-mount design anchored to the crown becomes the better fit.
Cracked or loose tiles change the plan. A cap clamped to a broken tile can come off in the first strong wind. We check the top tile before ordering and tell you if it needs attention.
Wildlife timing
Yes, once installed, a screened cap keeps birds out of the flue. Timing matters, though. If birds are actively nesting in the chimney, we do not seal them in or remove an active nest. We wait until the nest is empty and check any wildlife rules that apply before fitting the cap. Late winter, before nesting starts, is a sensible time to cap an open flue if birds have used it in past years.
Process
Open fireplace, insert or stove, and the fuel burned.
Tile or liner size, tile height and crown condition. Owners stay on the ground.
Single-flue, outside-mount or liner-specific, with mesh suited to the fuel.
Stainless fasteners into sound material, no sealing of working flues.
Stove owners can read more on liner-fit caps in the chimney cap installation guide guide, and on liner and crown repair on the South Carolina chimney services hub page.
Metal choice
For a wood stove or open fireplace flue, stainless steel caps are the practical choice. They handle heat, moisture and the acids in wood smoke better than galvanized steel, whose coating wears away and lets rust weaken the mesh. Copper is an option on brick chimneys where appearance matters, but it costs more and does not add protection a stainless cap lacks.
Cost depends on the material, whether a liner-specific cap is needed, how many flues there are, and roof access. A steep or tall roof can need more setup time than the cap itself. We measure before quoting, and we do not list fixed prices, because two chimneys in the same town can need quite different parts.
Whatever the material, plan on a look at the cap during each sweep, since mesh on a wood-burning flue collects creosote over a season.
Cost factors
Quotes come after measuring. A cap that fits a stainless liner is a different part from one that clamps to a clay tile, and liner-specific caps vary by liner size and brand. Mesh choice for wood smoke, the number of flues, any cracked top tile and roof height all play a part. If a sweep is needed first to clear creosote, that is priced separately. No fixed prices appear on this page.
Caps, covers and access
Discuss your chimney top before scheduling.
Call 864-727-7460 ↗
Call the town permit technician at 843-719-7914 and describe the job before work starts, since requirements can depend on scope. The town's Community Development department handles permits and inspections inside town limits. Addresses outside the limits go to Berkeley County instead.
Because the opening points straight up and nothing sheds water away from it. Summer thunderstorms can drop heavy rain quickly. A hooded cap keeps most of it out.
Not if it is sized and screened correctly. Low hoods, very fine mesh and creosote-clogged screens are what cause problems. Regular sweeping keeps the screen open.
A single-flue cap sized to the outside of the tile, clamped or anchored to the crown. Short tiles usually call for an outside-mount cap. Cracked tiles should be addressed first.
Not while the nest is active. We wait until the birds have left and check any wildlife rules first. Capping before the next nesting season prevents a repeat.
Part of our South Carolina service network
Nearby, see chimney cap installation in Sangaree SC, chimney cap installation in Goose Creek SC, Ladson chimney cap installation, Summerville chimney cap installation and Hanahan chimney cap installation.
For a property elsewhere in South Carolina, start with our South Carolina chimney repair hub, or read the company's general chimney cap installation guide. Those company guides may show a Georgia number; use 864-727-7460 for your Moncks Corner inquiry. This page does not represent a staffed Moncks Corner office.
References: Town of Moncks Corner Building Permits and Inspections · SC State Climatology Office, Climate of South Carolina
Have your property address ready